How Should You Set Up a Work Van? A Practical Guide to Shelving, Storage, Ladder Racks & More
Posted by Work Van Equipment on 8/27/2026 to
Van Equipment
An empty cargo van gives you plenty of room, but simply filling that space with shelving and accessories does not guarantee a good work van setup.
The best approach is to plan around what you carry, how often you use it, and how you move through the van. A service technician who reaches for small parts all day may need a very different layout from a contractor carrying ladders, large tools, and materials.
A typical setup may combine shelving, drawers, bins, a partition, ladder or material storage, security equipment, and open cargo space. The exact configuration should depend on the vehicle, trade, tools, and workflow.
7 Work Van Upfit Mistakes That Cost Contractors Time and Money
Posted by Work Van Equipment on 7/31/2026 to
Van Equipment
A work van upfit should make tools easier to find, cargo safer to transport, and each service call more efficient. However, ordering equipment before confirming the vehicle specifications, payload, installation requirements, and daily workflow can result in wasted space or equipment that does not fit the way the technician works.
The best approach is to plan the van around the vehicle and the work performed inside it. Start by confirming the van’s year, make, model, wheelbase, roof height, and door configuration. Then identify what the technician carries, where each item is used, and how much open cargo space must remain.
A typical setup may combine shelving, drawers, bins, a partition, floor protection, cargo restraints, and exterior ladder or material storage. The exact configuration should depend on the vehicle, trade, cargo, and workflow—not a universal equipment list.
Milwaukee PACKOUT Van Shelving: Is ProStow Right for Your Work Van?
Posted by Work Van Equipment on 6/11/2026 to
Van Equipment
If you use Milwaukee PACKOUT in a work van, you probably know the problem: the boxes organize your tools, but the stack itself can become difficult to work with.
When PACKOUT boxes are stacked on the van floor, getting to one case may mean moving two or three others first. ProStow solves this by giving PACKOUT cases and organizers their own shelf positions inside the van.
For contractors who already use PACKOUT, ProStow can make individual boxes easier to access while keeping the cargo area more organized. Choose slide-out shelves when frequent access is the priority, or fixed shelves when you want a simpler, stationary storage setup.
How to Choose the Right Ladder Rack for Your Work Van
Posted by Work Van Equipment on 4/21/2026 to
Van Equipment
Need to carry ladders, conduit, pipe, or long materials without filling up the inside of your work van? A van ladder rack moves appropriate long cargo to the roof, freeing up interior space for tools, shelving, parts, and equipment.
But not every ladder rack works the same way.
The right choice depends on your van, roof height, what you carry, how often you load ladders, and how you work. A high-roof van used for frequent service calls may benefit from a drop-down ladder rack, while a contractor carrying ladders along with pipe, lumber, or conduit may prefer a cargo rack or crossbar system.
Ranger Design B-Series Steel Shelving: Is It Right for Your Work Van?
Posted by Work Van Equipment on 3/30/2026 to
Van Equipment
Searching through loose tools, parts, and supplies can slow down every service call. For contractors, technicians, small businesses, and fleet operators seeking a practical starting point for van organization, Ranger Design B-Series steel shelving may provide a cost-conscious foundation that can be expanded with accessories over time.
The B-Series is most relevant when you need general-purpose steel shelving rather than storage dedicated to one toolbox platform or a highly specialized trade package. Its modular design allows you to begin with basic shelving and add bins, dividers, doors, drawers, and other accessories according to your workflow.
Work Van Safety Guide: Equipment and Layout Choices That Can Reduce Risk
Posted by Work Van Equipment on 2/25/2026 to
Van Equipment
Frequent stops, tight jobsites, repeated entry and exit, and unsecured equipment can create avoidable risks in a commercial van. For contractors, service technicians, small businesses, and fleets, a safer setup begins with three priorities: stable entry and exit, organized cargo, and equipment that matches the vehicle and daily workflow.
Practical upgrades may include grab handles, commercial shelving, ladder racks, van flooring, and purpose-built tank or cargo restraints. Not every van needs every product. The best configuration depends on the vehicle, trade, equipment carried, frequency of access, and applicable cargo-safety requirements.
Increase Your Charging Power with the New Holman Pure Sine Wave Inverters
Posted by Work Van Equipment on 1/22/2026 to
Van Equipment
If you need to charge batteries, run electronics, or power AC equipment from your work van, an inverter can turn the vehicle's 12-volt DC electrical power into usable AC power.
The important question is not simply, "What is the biggest inverter I can install?" It is how much power your equipment actually requires and whether your vehicle's electrical system can support that demand.
Holman offers pure sine wave inverters in 600W, 1000W, 2000W, and 3000W models. Smaller models may be appropriate for chargers, laptops, diagnostic equipment, and other lighter electrical loads, while higher-demand applications may require a 2000W or 3000W inverter.
How to Choose the Best Shelves for Your Work Van
Posted by Work Van Equipment on 12/11/2025 to
Van Equipment
The best shelving for a work van depends on what the vehicle carries and how often that cargo changes. Fold-away shelving is usually the better choice when open floor space is regularly needed for packages or bulky equipment. Fixed steel shelving suits tools, parts, and materials that need permanent organization. Aluminum shelving provides similar everyday organization with less equipment weight and resistance to water and chemicals.
Electricians, HVAC technicians, plumbers, general contractors, delivery operators, and service fleets may prioritize different features. Before ordering, consider the vehicle's year, roof height, wheelbase, interior dimensions, payload, and mounting requirements—not just the shelf width.
Aluminum vs. Steel Work Van and Truck Equipment: Which Is Right for Your Fleet?
Posted by Work Van Equipment on 11/26/2025 to
Van Equipment
Aluminum is usually the better choice when reducing installed equipment weight or avoiding red rust is a priority. Steel is often preferred when a technician wants traditional, rigid construction or a lower-cost option within a comparable product line. Neither material is automatically stronger, safer, or better for every work van or truck.
The correct decision should be based on the specifications of the exact shelving unit, partition, drawer, or rack—including its weight, load rating, finish, vehicle compatibility, warranty, and installation requirements. A well-designed aluminum product may equal the listed capacity of a comparable steel product, while two products made from the same material may have very different ratings.
This Just In: Brand New Packages for the Chevy BrightDrop Vans!
Posted by Work Van Equipment on 10/29/2025 to
Van Equipment
The right Ranger Design package for a Chevrolet BrightDrop depends on the vehicle model and the work it performs. Contractor steel packages provide open fixed shelving for tools and materials. Service packages add drawers, bins, and dividers for smaller parts. Aluminum packages reduce installed equipment weight and include more organization accessories, while delivery packages use fold-away shelving to preserve flexible cargo space.
BrightDrop 400 and BrightDrop 600 packages are not interchangeable. Each uses model-specific mounting tracks and an E-Floor designed for that vehicle. Before ordering, confirm whether the van is a BrightDrop 400 or BrightDrop 600 and compare the exact package contents, installed weight, workflow, and cargo requirements.
Ranger Design Deep Shelves Are Now Available for More Vans
Posted by Work Van Equipment on 9/29/2025 to
Van Equipment
Ranger Design N4 deep steel shelving gives low-roof and compact-van owners more shelf depth for bulky tools, cases, bins, and replacement parts. The units are 44.5 inches high and approximately 20 inches deep, with three adjustable shelves. They are available in widths from 36 to 96 inches.
Deep shelving is best for technicians who need the additional storage depth and have enough aisle space to accommodate it. Contractors who prioritize a wider center aisle, carry mostly shallow bins, or frequently move through the cargo area may be better served by standard-depth shelving.
Elevate Your Cargo Van with the NEW Holman Composite Partitions
Posted by Work Van Equipment on 8/25/2025 to
Van Equipment
Unsecured tools, equipment, and materials can move toward the cab during sudden stops or a collision. A properly fitted cargo partition creates a barrier between the occupants and cargo while helping organize the van into separate driving and working areas.
The Holman Composite Partition is designed for contractors, service professionals, and fleet operators who want cargo separation without the weight of a traditional steel partition. Its ABS construction may also help reduce cargo-area noise and make the cab easier to heat or cool.
Enhance Your Vehicle’s Security with the NEW Daken Security Locks!
Posted by Work Van Equipment on 7/25/2025 to
Van Equipment
Contractors, service technicians, couriers, and fleet operators often leave valuable tools or cargo inside their vans while working or making deliveries. Factory door locks provide basic security, but an additional exterior lock can add another barrier against unauthorized access.
Holman offers three Daken cargo van lock systems: Saturn GO, Saturn EVO, and Blackstone. Saturn GO uses a key for opening and closing, Saturn EVO uses a key and manual shell rotation, and Blackstone combines key-operated opening with automatic closing. The right choice depends on how often the van doors are opened and whether the driver prefers manual or automatic locking.
These locks should be considered one part of a broader vehicle-security plan. Tools and cargo should also be stored out of sight, secured when practical, and covered by appropriate business or cargo insurance.
Smart Storage Starts with our New Grab-and-Go Shelving Bundle Solutions!
Posted by Work Van Equipment on 6/24/2025 to
Van Equipment
Our new line of quick set-up shelving bundles provide the perfect balance between customization, cost and convenience. You can get the perfect size shelf and the right amount of storage with just a click of a button.
Maximize Efficiency in your Delivery Vehicle
Posted by Work Van Equipment on 5/26/2025 to
Van Equipment
With the proper equipment, you can maximize the space in your cargo van, so you are always organized and ready for any delivery request. Take a look at some quick upgrades you can make now to improve your delivery operation and ensure on-time delivery every single time.
Attention California Customers: Installation Services Now Available!
Posted by Work Van Equipment on 4/9/2025 to
Van Equipment
If you're a California-based business with a work van or truck, outfitting your vehicle just got a whole lot easier. Work Van Equipment is now proud to offer professional installation services for all Holman equipment—helping you get your vehicle job-ready in just a few simple steps.
Tank Racks and Holders: The Necessary Accessories for Every HVAC Technician
Posted by Work Van Equipment on 2/21/2025 to
Van Equipment
As HVAC professionals, you know that every tool and piece of equipment you use plays a crucial role in your daily tasks. Whether you're working on large commercial systems or smaller residential units, the proper storage and organization of refrigerant tanks and bottles are essential for efficiency and safety. A good tank rack and holder can revolutionize your HVAC work by making your day-to-day operations safer, more organized, and more efficient.
Transport Ladders with Ease with the Ranger Design Max Rack!
Posted by Work Van Equipment on 12/30/2024 to
Van Equipment
The Ranger Design Max Rack is a durable, easy-to-use rack system that keeps your ladders safe and accessible while optimizing the space in your Transit, Sprinter or ProMaster van. This drop down ladder rack is perfect for tradespeople and contractors who need to climb hard to reach places, and it ensures that you can transport your gear with ease and peace of mind.
Holiday Van Upfits: Van Equipment for Seamless Deliveries
Posted by Work Van Equipment on 11/26/2024 to
Van Equipment
Whether you're handling holiday gifts or regular customer orders, efficiency is more important than ever. Having an upfitted delivery van can make all the difference in getting ahead of the holiday rush. By optimizing your cargo van with the right shelving, partitions, and accessories, you can enhance productivity, keep goods secure, and ensure a hassle-free delivery experience.
Upgrade your Sprinter with the New No Drill Ladders
Posted by Work Van Equipment on 10/29/2024 to
Van Equipment
Accessing your van's roof for ladders, pipes, and other cargo can often be a hassle. The new Surco Van Ladders are here to transform how you reach your van's rooftop. With their drill-free installation, these ladders are designed to make your life easier—a must-have for every Sprinter owner!
Essential Equipment for Electricians: Shelves, Accessories and more
Posted by Work Van Equipment on 9/30/2024 to
Van Equipment
Whether you’re working on residential, commercial, or industrial projects, investing in high quality gear can make a big difference in your productivity. Work Van Equipment offers a wide range of products tailored to the needs of electricians. Here’s a rundown of essential equipment that every electrician should consider adding to their work van.
Ranger Design 20” Wide Aluminum Sliding Door Partitions are Here!
Posted by Work Van Equipment on 8/21/2024 to
Van Equipment
Enter the new Ranger Design 20" Sliding Door Partitions—a game-changer that combines style, practicality, and protection to enhance your cargo van. These are their lightest and widest partitions to date and are a great addition to your Ford Transit or Mercedes Sprinter high roof cargo van. They are designed with a sliding door that will divide the driver’s cabin and cargo area without the need for traditional doors that swing open. With a sleek 20-inch width, they are particularly suited for cargo vans where efficiency and space-saving are paramount.
Keep Yourself Safe this Season and Beyond
Posted by Work Van Equipment on 7/26/2024 to
Van Equipment
As a tradesperson, your work environment can change from day to day and can even get hazardous. Whether you are a carpenter, electrician, or plumber, safety in your business should be of utmost importance. A few important items can help you stay safe and ensure a more productive workplace.
Choosing the Best Cargo Van Partition: A Quick Guide
Posted by Work Van Equipment on 6/26/2024 to
Van Equipment
The perfect partition will keep you safe, comfortable, and ready to get to work at a moment’s notice. Here are a few things to consider when making a decision.
3 Years and Counting: WVE is a Certified Five Star Platinum Ranger Design Distributor!
Posted by Work Van Equipment on 5/23/2024 to
Van Equipment
For the third year in a row, Ranger Design has awarded Work Van Equipment the prestigious Five Star Platinum Distributor award! As an authorized distributor, Work Van Equipment provides commercial van shelving storage systems, ladder racks, and accessories from the industry’s strongest brands. We are thrilled and honored to receive this award again.
